Surge Protective Device

Hager SPD's protect electrical and electronic equipment against transients, originating from lightning and switching transient sources

New requirement for the standard

These transients can cause premature ageing of equipment, logic failures and down time, complete destruction of electrical components and the entire electrical distribution system. Surge Protection Devices are strongly recommended in sites that are exposed to lightning, to protect sensitive and expensive electrical equipment such as TV's, home entertainment systems, Hi-Fi's, PC's, CCTV's, alarms etc...

Surge Protective Devices with plug in cartridge

SPDs with plug in cartridge ensure :

  • General protection of electric equipment.
  • Protection in common and differential mode for domestic, industrial and commercial buildings.
  • Plug in cartridges make replacement of the protection easier, without need to cut off the power supply.
  • with reserve indicator, shows the intermediary state, with indication of the need to change the cartridge before disconnection, but keeps the maximal protection capacity till the end.
 

Surge Protective Devices (Fastness)

This new version is totally approved according to the EN ,GB18802.1-2002 & IEC61643 standard, also gets the KEMA quality authentication of Holland.Thanks to the very low Up (from 1,3kV to 1.8kV) level, the installation and its equipment are protected.

  • protection in Common & Differential Mode.
  • Independent lift indication function.
  • Clear blue identification of the neutral terminal.
 

Registration